This product has been discontinued and removed from our shelves.
Description of Wheel Loader ZL30H:| Overall Dimension | ||
| 1 | Length(with bucket on ground) | 6863(mm) | 
| 2 | Width(to outside of wheels) | 2305mm) | 
| 3 | Bucket width | 2460(mm) | 
| 4 | Height(To the top of the cab) | 3095(mm) | 
| 5 | Wheel base | 2750(mm) | 
| 6 | Tread | 1855(mm) | 
| 7 | Min. ground clearance | 370(mm) | 
| Main Technical Specification | ||
| 1 | Rated load | 3000(Kg) | 
| 2 | Operating weight | 10200KG | 
| 3 | Rated bucket capacity | 1.7(m3) | 
| 4 | Max. breakout force | 96kN | 
| 5 | Max. dump clearance | 2850(mm) | 
| 6 | Dump reach | 1030(mm) | 
| 7 | Dump angle at any position | ≥45° | 
| 8 | Min. turning radius | |
| (1) Outside of bucket | 5600(mm) | |
| (2) Outside of rear wheel | 5205(mm) | |
| 9 | Pivot angle frame | 38±1° | 
| 10 | Oscillating angle of rear axle | ±11° | 
| 11 | Lifting time of bucket | ≤5.1(sec.) | 
| 12 | Lowering time of bucket | ≤3.0(sec.) | 
| 13 | Dumping time | ≤1.1(sec.) | 
| 14 | Traveling speed(Km/h),3 forward and 3 reverse | |
| (1) 1st gear forward | 7.3 | |
| (2) 2nd gear forward | 15.7 | |
| (3) 3rd gear forward | 35 | |
| (1) 1st gear reverse | 7.8 | |
| (2) 2nd gear reverse | 16.8 | |
| (3) 3rd gear reverse | 36 | |
| Diesel engine | ||
| 1 | Model | Dongfeng Cummins 6BT5.9-C | 
| 2 | Type | Direct injection. Turbocharged. Water cooling | 
| 3 | Rated output | 87(KW) | 
| 4 | Inter-bore of cylinder/stroke | 102 /120 (mm) | 
| 5 | Total exhaust of cylinder | 5.9 (L) | 
| 6 | Voltage of starting motor | 24(V) | 
| 7 | Rated speed | 2200(r/min) | 
| 8 | Max. Torque | 440(N.M) | 
| 9 | Starting type | Electric | 
| 10 | Min. specific fuel consumption | 220(g/Kw.h) | 
| Transmission System | ||
| 1. Torque Converter | ||
| 1 | Model | YJH315A-4 (Shanxi Aerospace Power) | 
| 2 | Type | 3-elements. Single stage | 
| 3 | Torque ratio | 2.4 | 
| 4 | Cooling type | Pressure oil circulating | 
| 2. Transmission case | ||
| 1 | Model | Chinese SINOMACH | 
| 2 | Type | power shift, spur gear constantly in mesh | 
| 3 | Gear shift position | 3 Forward and 3 reverse gears | 
| 3. Axle and Tire | ||
| 1 | Type of main reducer | spiral bevel gear, single stage | 
| 2 | Gear ratio of main reducer | 3.889 | 
| 3 | Type of final reducer | Single stage planetary | 
| 4 | Gear ratio of final reducer | 4.941 | 
| 5 | total ratios | 19.216 | 
| 6 | Max. traction | 83kN | 
| 7 | Specifications of tire | 17.5-25-12PR | 
| Working Device Hydraulic System | ||
| 1 | Model of oil pump | CBGj2100 | 
| 2 | System pressure | 160(kgf/cm2) | 
| 3 | Model of distribution valve | GDF32 D2 | 
| 5 | (D*L)Dimension of lifting cylinder | Ф125*70*697(mm) | 
| 6 | (D*L)Dimension of tilting cylinder | Ф150*70*466 (mm) | 
| Steering System | ||
| 1 | Type | Middle articulated frame. Full-hydraulic Steering | 
| 2 | Model of steering pump | CBGj2050 | 
| 3 | Model of steering gear | BZZ1-E400C+FKA-143020 | 
| 4 | System pressure | 14MPa | 
| 5 | Dimension of steering cylinder | Ф70*40*323(mm) | 
| Brake System | ||
| 1 | Type of traveling brake | Assisted oil.4 wheel brake | 
| 2 | Air pressure | 7-8(kgf/cm2) | 
| 3 | Type of emergency brake | Automatic cutting air brake | 
| 4 | Type of parking brake | Drum brake Manual control cutting off air brake | 
| Oil Capacity | ||
| 1 | Fuel(diesel) | 130(L) | 
| 2 | Engine lubricating oil | 20(L) | 
| 3 | Oil for converter and gear box | 35(L) | 
| 4 | Oil for hydraulic system | 120(L) | 
| 5 | Oil for driving axles(F/R) | 16/15(L) |